U20 Class Member's Forum

General Category => U20 Boat Maintenance & Care => Topic started by: Don Corey on September 22, 2011, 08:13:27 PM

Title: Utimate 20 - Replacement Parts
Post by: Don Corey on September 22, 2011, 08:13:27 PM
Recently there has been quite a demand for worn, broken and lost parts.  I now have the following parts in stock.  All prices below exclude shipping.

Removeable rear mast crutch   $195
out of stock....Forestay custom marine swage eye   $25   (needed to duplicate the existing forestay)   
out of stock....Removeable motor bracket   $85
Cabin hatch lock hasp   $30
out of stock....Keel wedges predrilled   $78 / pair
out of stock....Fiberglass keel boot (two piece)   $140
Acrylic cabin top sliding hatch   $120
out of stock...."U20" cabin top logo for boats w/windows - gray   $34 / pair
out of stock...."Ultimate 20" cabin top logo for boats wo/windows - gray   $48 / pair
out of stock....Carbon rudder - predrilled w/no hardware  $985

Thanks to class member Michael Eisenberg for building some of these parts.
Contact:  Don Corey at 704-622-2828 cell or antics@bellsouth.net
Title: Re: Utimate 20 - Replacement Parts
Post by: John Scharer on October 10, 2011, 04:16:43 PM
Hi,

I would like to get/order/pay for 2 new predrilled keel wedges and the lock rasp.
How does one set up payment and delivery time?  Thanks for offering to make.


Thanks,

John Scharer
Scharer@engr.wisc.edu
608-251-0850
Title: Re: Utimate 20 - Replacement Parts
Post by: Gregg Henning on October 11, 2011, 02:05:20 PM
Don,

I think Nate Selsted needs a motor mount as well.

Thanks,

Gregg
Title: Re: Utimate 20 - Replacement Parts
Post by: Dave Whyman on October 11, 2011, 11:36:52 PM
Which version of the keel boot is this?  Do you have a picture?  Mine is all busted up...
Title: Re: Utimate 20 - Replacement Parts
Post by: Glenn VanHeel on October 12, 2011, 02:29:05 AM
What's a keel boot?
Title: Re: Utimate 20 - Replacement Parts
Post by: Denise Hammond on October 12, 2011, 04:06:04 AM
It is the moulded fiberglass piece that fits around the keel (when it is hoisted) and over the keel hatch to keep water and cats out.
Title: Re: Utimate 20 - Replacement Parts
Post by: Glenn VanHeel on October 12, 2011, 04:43:58 AM
Makes sense thanks!
Title: Re: Utimate 20 - Replacement Parts
Post by: Don Corey on October 12, 2011, 04:18:12 PM
Dave, this keel boot is the one piece version, difficult to get on but doesn't fly off on the highway.
Let me know, thanks, Don
Title: Re: Utimate 20 - Replacement Parts
Post by: Eric Jurado on October 13, 2011, 09:19:59 AM
What is a forestay custom marine swage eye?
Title: Re: Utimate 20 - Replacement Parts
Post by: Don Corey on October 13, 2011, 02:12:05 PM
Eric, that is the swage eye that attaches to the drum of the jib furler. It has two welded loops for the jib tack and jib halyard adjuster attachment points.  You would only need one of these if you were going to replace the forestay.
Title: Re: Utimate 20 - Replacement Parts
Post by: Tom Burden on October 13, 2011, 03:17:35 PM
I would like to order one of these swage eyes with the loops. It is time for a new forestay.

Thanks,
Tom
Title: Re: Utimate 20 - Replacement Parts
Post by: Gregg Henning on October 13, 2011, 05:41:16 PM
Don,

Congrats you are no longer a U20 Youngster!!! Welcome to Mid Life!!! ;D

Gregg
Title: Re: Utimate 20 - Replacement Parts
Post by: Don Corey on October 13, 2011, 11:08:10 PM
It's about time!  Okay, what's next?
Title: Re: Utimate 20 - Replacement Parts
Post by: Eric Jurado on October 14, 2011, 03:27:24 AM
Thanks, Don.  :)
Title: Re: Utimate 20 - Replacement Parts
Post by: John Scharer on December 06, 2011, 02:27:55 AM
Hi Don,

Are there any plans to make new keel wedges or cuddy SS rasp?

Thanks,

John Scharer
#61
Title: Re: Utimate 20 - Replacement Parts
Post by: Don Corey on December 06, 2011, 03:26:40 PM
John, the cabin hatch lock hasps are now in stock and the keel wedges have been on order for some time and should be arriving any time.  I'll let you know when they arrive.
Don Corey - Ultimate Sales East, LLC
Title: Re: Utimate 20 - Replacement Parts
Post by: John Scharer on December 26, 2011, 08:01:01 PM
Hi Don,

Thanks for note,  Ready to order and call visa/other for hasp and 2 new keel wedges.  The bottom of my old
wedges are broken off.  Let me know when ok to get and pay.



Happy Holidays,

John Scharer
#61
Phone (828)719-8516
Title: Re: Utimate 20 - Replacement Parts
Post by: Jim Pearson on February 05, 2012, 07:23:53 PM
Hi Don,
Do you have any keel wedges left?
Jim Pearson
CAN200
Title: Re: Utimate 20 - Replacement Parts
Post by: Don Corey on February 08, 2012, 02:35:07 AM
Jim, yes, this time I ordered enough in stock to last a while.  Are you coming to the Midwinter Regatta here on March 17-18 or do you need them sooner?  $78 USD predrilled plus shipping. 
Let me know.
Don Corey   704-622-2828 cell  or  antics@bellsouth.net