U20 Class Member's Forum

General Category => U20 Boat Maintenance & Care => Topic started by: michael.strauss on December 11, 2012, 08:13:11 PM

Title: Keel Box Rebuild?...
Post by: michael.strauss on December 11, 2012, 08:13:11 PM
The top cap of my keelbox on #121 is failing.  It is cracking through the fiberglass and continues to worsen.  After a home-repair that didn't take, this winter I'm going to have it professionally redone.  Any recomendations from anyone who have had this done before regarding what instructions to give the pros before they begin the job??   Thanks!
Title: Re: Keel Box Rebuild?...
Post by: Gregg Henning on December 13, 2012, 01:59:33 AM
Michael,

I don't know where you have the boat, but I would suggest that you take it somewhere that understands sportboats with lifting keels.  Where are you located?

Gregg
#149
Goombay Smash

Any pictures of the current problem?
Title: Re: Keel Box Rebuild?...
Post by: michael.strauss on January 14, 2013, 09:54:33 PM
I am located in Anacortes WA.  There are many boat builders and the like out here. 

I've been trying to get photos on this thing, but I'm having trouble as they are all too big... 
Title: Re: Keel Box Rebuild?...
Post by: Gregg Henning on January 16, 2013, 10:05:09 PM
Michael,

I would recommend a location that understands a sportboat with a Keel that lifts like ours.  Not all boat repair places have worked on boats like the Ultimate 20.

I have taken my boat 6 hours away to a repair location that I can trust.

Good Luck,

Gregg
Title: Re: Keel Box Rebuild?...
Post by: Chris Chambers on January 23, 2013, 01:35:07 PM
Try CSR Marine - they have a great reputation and do most of the J24 fleet work.  I know of 3 Melges 24s that they have repaired too.
Title: Re: Keel Box Rebuild?...
Post by: michael.strauss on February 20, 2013, 05:54:08 PM
Keel box is done.  #121 has gotten a nice facelift from the smart folks at Anacortes Rigging & Yacht Services. 

Sea Trials this weekend... 
Title: Re: Keel Box Rebuild?...
Post by: Chris Chambers on February 22, 2013, 04:10:58 PM
Great news - good luck!